Injection Molding Machine Manufacturer
Specification:
| | | | GS388V |
| A | B | C | D |
| INJECTION UNIT | Screw Diameter | mm | 65 | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 21.5 | 20 | 18.7 | 17.5 |
| Shot Size(Theoretical) | cm3 | 1068 | 1239 | 1423 | 1619 |
| Injection Weight | g | 972 | 1127 | 1295 | 1473 |
| Injection Rate | g/s | 292 | 339 | 389 | 443 |
| Plasticizing Capacity | g/s | 38.2 | 44.9 | 51.4 | 58.7 |
| Injection Pressure | Mpa | 213 | 184 | 160 | 141 |
| Screw Speed | rpm | 0-185 |
| CLAMPING UNIT | Clamp Tonnage | KN | 3800 |
| Toggle Stroke | mm | 700 |
| Space Between Tie Bars | mm | 730*730 |
| Max.Mould Height | mm | 730 |
| Min.Mould Height | mm | 280 |
| Ejector Stroke | mm | 180 |
| Ejector Tonnage | KN | 110 |
| Ejector Number | piece | 13 |
| OTHERS | Max.Pump Pressure | Mpa | 17.5 |
| Pump motor Power | KW | 37 |
| Heater Power | KW | 24.85 |
| Machine Dimension(L*W*H) | m | 7.36*1.96*2.15 |
| Machine Weight | t | 15 |
| Hopper Capacity | Kg | 50 |
| Oil Tank Capacity | L | 750 |
Machine Feature:
1 Enhanced clamping mechanism to meet requirements for efficient production.
2 Excellent clamping features with optimized linkage mechanism to have faster and smooth operation.
3 Professional plasticizing unit is applicable for production of various raw materials, and to improve plasticize performance significantly.
4 Excellent injection performance with twin-cylinder injection mode, have more reliable and stable performance.
5 Professional platen optimization, the platen after finite element analysis and optimization has high rigidity and strength.
6 Centralized lubrication system with reliable protective configuration, quantitative distribution and centered lubrication, provide more professional lubrication protection and extend mechanical life.
7 New frame type structure, simple and clean appearance, with more reasonable stress on machine body and high rigidity.
Machine FAQ
1. The machine is in running condition, and can make products?
Sure, machine must be in running condition, and take machines back, can make goods directlry.
2. Is there any warranty?
Of course, within three months, machine is with problem. offer free components.
3. Is there any oversea service?
If keep our engineers safety abroad, engineer will go oversea to help clients deal with problems.
4. Don't know how to set the production parameter of the controller?
Will take video to show how to do it.
5. How to confirm the machine auxilaries?
We'lll advise every auxilary machine capacity based on machine capacity and the environment of clients' country
6. Other detail problem with machine and production.
Let's discuss further.
Product Tags:
|
|
High Performance Large Injection Molding Machine 3880KN Clamping Force Images
|
