Plastic Bubble Machine 160T
| | | GS168V |
| A | B | C |
|
INJECTIONUNIT
| Screw Diameter | mm | 40 | 45 | 50 |
| Screw L/D Ratio | L/D | 22.5 | 20 | 18 |
| Shot size(Theoretical) | cm3 | 253 | 320 | 395 |
| PS) Injection Weight | g | 230 | 291 | 359 |
| PS Injection Rate | g/s | 100 | 126 | 156 |
| PS Plasticizing capacity | g/s | 13.9 | 18 | 21.6 |
| Injection Pressure | Mpa | 240 | 190 | 154 |
| Screw Speed | Rpm | 0-195 |
|
CLAMPINGUNIT
| Clamp Tonnage | KN | 1600 |
| Toggle stroke | mm | 430 |
| Space Between Tie Bars | mm | 470*470 |
| Max.Mold Height | mm | 520 |
| Min.Mold height | mm | 180 |
| Ejector stroke | mm | 140 |
| Ejector tonnage | KN | 33 |
| Ejector Number | piece | 5 |
|
OTHERS
| Max.Pump Pressure | Mpa | 17.5 |
| pump motor power | KW | 15 |
| Heater Power | KW | 9.75 |
| Machine Dimension(L*W*H) | m | 4.9*1.29*1.96 |
| Machine Weight | t | 5.3 |
| PS Hopper Capacity | Kg | 25 |
| Oil Tank Capacity | L | 350 |
Servo Controller Part:
1. High Precise Control
The servo system can control the machine's pressure, speed & location precisely, make sure that the error of accurate repeatability precision for the shot measurement is <0.3%
2. High sensitive response
Because the motor vector is matched with the controller accurately, it only takes 0.5sec. inputing the number from 0 to max. Compared with other traditional hydraulic injection molding machine, AF series is more faster in speed with shorter cycle time and high efficient in production
3. Low noise
Compared with traditional fixed pump & variable pump system, the noise is 1/10 lower under normal circumstance, more suitable for sealed dustless workshop
4. Energy Saving
Overall efficiency is 10% more & driving capacity is 18% more than common machine. This series can save 30-80% energy, and achieve first-class energy efficency
5. Water cooling saving
The system condition prevent high pressure uploading without any power output, leads to the water cooling saving
FAQ:
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
Product Tags:
|
|
Professional 160T Two Color Injection Molding Machine 430mm Opening Stroke Images
|
